Upgrading using scp, 2 upgrading using scp – Tandberg Data N3 User Manual
Page 37
31
4. Enter the release key and press Install Software. You will get a new screen where
you can upload the software image:
5. Browse to the file containing the software and press Install. You should see a page
indicating that upload is in progress:
6. When the upload is completed you should see the following:
7. Press Restart. You should see a confirmation window:
8. The software is installed. The system will then perform another reboot to restore
system parameters. After 3-4 minutes, the Gatekeeper is ready for use.
9. If you are upgrading from an older version of the Gatekeeper, you will need to install
new option keys on the System Configuration > Upgrade page.
4.2 Upgrading Using SCP
To upload using SCP you need an SCP program.
Using SCP you need to transfer two files to the Gatekeeper
A text file containing the release key.
A file containing the software image.