Tandberg Data N3 - Manual (Page 40)

TANDBERG Gatekeeper User Manual
34
Command Usage Description
ResourceUsage xstatus ResourceUsage Reports usage of system resources.
Registrations : Number of currently registered
endpoints.
MaxRegistrations : Maximum number of registered
endpoints since system start.
PortRegistrations : Total number of currently
registered endpoints and services.
MaxPortRegistratoins . Maximum number of registered
endpoints and services since system start.
TraversalCalls : Number of currently active traversal
calls.
MaxTraversalCalls : Maximum number of traversal calls
since system start.
TotalTraversalCalls : Total number of traversal calls
since system start.
NonTraversalCalls : Number of currently active non
traversal calls.
MaxNonTraversalCalls : Maximum number of non
traversal calls since system start.
TotalNonTraversalCalls : Total number of non
traversal calls since system start.
IntraZoneBandwidth : Total bandwidth used intra zone.
InterZoneBandwidth . Total bandwidth used to all
neighboring zones.
SubZones xstatus SubZones Reports call and bandwidth information for all subzones on
the system.
SystemUnit xstatus SystemUnit Reports information about the system

Product name

Uptime

Software version

Software name

Release date

Number of calls supported

Number of registered endpoints and services
supported

Hardware serial number
Traversal xstatus Traversal Reports whether or not the Gatekeeper has registered with
the Border Controller and established a traversal link.
Zones xstatus Zones Reports the call and bandwidth information for all zones on
the system.
5.2 Configuration
The configuration root command, xconfiguration, is used to set configuration settings.
To list all xconfiguration commands type