Tandberg Data N3 - Manual (Page 41)

35
xconfiguration ?
To list all configuration data, type
xconfiguration
To show a specific configuration value, type
xconfiguration <name>
To show usage information for a specific configuration value, type
xconfiguration <name> ?
To set a configuration element type
xconfiguration <name> <param1>: value1 <param2>: value2
There is also a shorthand for configuration element with several parameters:
xconfiguration <name> value1 value2
NOTE
Remember to use the colon after naming the parameters.
Configuration commands Description
xConfiguration Authentication Database:
<LocalDatabase/LDAPDatabase> Selects between a local and remote LDAP repository of
password information for authentication.
Default is LocalDatabase.
xConfiguration Authentication LDAP
BaseDN: <S: 0, 255> The Distinguished Name to use when connecting to an LDAP
server.
Default is an empty string.
xConfiguration Authentication Mode:
<On/Off> Whether or not to use H.235 authentication of calls and
registrations.
Default is off.
xConfiguration Authentication
Credential [1..1000] Name: <username> Specifies the username of a credential in the authentication
credential list
xConfiguration Authentication
Credential [1..1000] Password:
<password> Specifies the password of a credential in the authentication
credential list
xConfiguration DNS Server
Address:<IPAddr> Sets the IP address of the DNS server to be used when
resolving domain names.
You must restart the system for changes to take effect.
xConfiguration Ethernet Speed:
<Auto/10half/10full/100half/100full/> Sets the speed of the Ethernet link. Use auto to automatically
configure the speed. To get the current speed, use the
xstatus Ethernet Speed command.
You must restart the system for changes to take effect.
xConfiguration ExternalManager Address:
<IPAddr> Sets the IP address of the External Manager. The External
Manager is the remote system (such as the Tandberg
Management System (TMS)) used to manage the endpoints
and network infrastructure.
xConfiguration ExternalManager Path:
<path> Sets the path of the External Manager, e.g.:
xConfiguration ExternalManager Path:
“
tms/public/external/management/SystemManagementService.
asmx
”