Tandberg Data N3 - Manual (Page 44)

TANDBERG Gatekeeper User Manual
38
Configuration commands Description
xConfiguration Pipes Pipe [1..100]
Bandwidth Total Limit: <1..100000000> Bandwidth associated with a pipe, keyed by index.
xConfiguration Pipes Pipe [1..100]
Bandwidth Total Mode:
<None/Limited/Unlimited> Whether or not a given pipe is enforcing total bandwidth
restrictions. None corresponds to no bandwidth available.
xConfiguration Pipes Pipe [1..100]
Bandwidth PerCall Limit: <1..100000000> Per call bandwidth of a pipe.
xConfiguration Pipes Pipe [1..100]
Bandwidth PerCall Mode:
<None/Limited/Unlimited> Whether or not a given pipe is enforcing per-call bandwidth
restrictions. None corresponds to no bandwidth available.
xConfiguration Pipes Pipe [1..100]
Name: <pipename> Name for a pipe.
xConfiguration SNMP CommunityName:
<name> SNMP Community names are used to authenticate SNMP
requests. SNMP requests must have this `password' in order to
receive a response from the SNMP agent in the Gatekeeper.
You must restart the system for changes to take effect.
xConfiguration SNMP Mode: <On/Off> Turn on/off SNMP support.
You must restart the system for changes to take effect.
xConfiguration SNMP SystemContact:
<name> Used to identify the system contact via SNMP tools such as
TANDBERG Management Suite or HPOpenView.
You must restart the system for changes to take effect.
xConfiguration SNMP SystemLocation:
<name> Used to identify the system location via SNMP tools such as
TANDBERG Management Suite or HPOpenView.
You must restart the system for changes to take effect.
xConfiguration SSH Mode: <On/Off> Enables/disables SSH and SCP support.
You must restart the system for changes to take effect.
xConfiguration SubZones DefaultSubZone
Bandwidth PerCall Limit: <1..100000000> Per call bandwidth of the default subzone.
xConfiguration SubZones DefaultSubZone
Bandwidth PerCall Mode:
<None/Limited/Unlimited> Whether or not the default subzone is enforcing total bandwidth
restrictions. None corresponds to no bandwidth available.
xConfiguration SubZones DefaultSubZone
Bandwidth Total Limit: <1..100000000> Total bandwidth available on the default subzone.
xConfiguration SubZones DefaultSubZone
Bandwidth Total Mode:
<None/Limited/Unlimited> Whether or not the default subzone is enforcing per-call
bandwidth restrictions. None corresponds to no bandwidth
available.
xConfiguration SubZones
TraversalSubZone Bandwidth PerCall
Limit: <1..100000000> Per-call bandwidth available on the traversal subzone.
xConfiguration SubZones
TraversalSubZone Bandwidth PerCall
Mode: <None/Limited/Unlimited> Whether or not the traversal subzone is enforcing per-call
bandwidth restrictions. None corresponds to no bandwidth
available.
xConfiguration SubZones
TraversalSubZone Bandwidth Total Limit:
<1..100000000> Total bandwidth available on the traversal subzone.