Toshiba PROSEC T3H - Manual (Page 31)

User’s Manual
29
2. Expanded Functions
2.1.3 Saving the sampling trace condition
The sampling trace function is available on the T3H as well as the T3. In addition to
all the sampling trace functions on the T3, the T3H can save the sampling trace
condition into the IC memory card. By using this function, the sampling trace data
which is collected and saved in the IC memory card on one T3H can be displayed
using other T3H via the IC memory card.
This function is used as follows.
T3H which performs sampling (data collection):
•
Install the IC memory card in the T3H CPU module.
•
Set MMR for the PU slot in the I/O allocation in order to use an IC memory card for
sampling data storage.
•
Set the special device S0620 to ON.
•
Edit the sampling trace condition. The edited condition is also saved into the IC
memory card.
•
Execute the sampling trace. The sampling data is saved into the IC memory card.
•
Remove the IC memory card.
T3H which is used to display the sampling data stored in the IC memory card:
•
Install the IC memory card in which the sampling trace data is stored.
•
Set MMR for the PU slot in the I/O allocation in order to use an IC memory card for
sampling trace function.
•
Monitor the sampling trace condition. The condition stored in the IC memory card
is displayed.
•
Display the sampling trace data. The sampling data stored in the IC memory card
is displayed.
NOTE
To copy the sampling data stored in the T3H’s file register to an IC memory
card, set the special device S0620 to ON and display the sampling trace
condition. By this operation, the sampling trace condition and the sampling
data stored in file register are copied into the IC memory card.