Toshiba PROSEC T3H - Manual (Page 59)

User’s Manual
57
2. Expanded Functions
Transfer parameter table
Transfer object Bank / CH TYPE Leading address Transfer size Status
flag
XW/YW register 0 H00 0 to 511 (T3H)
0 to 255 (T3)
0 to 63 (T2) 1 to 256 None
W register 0 H01 0 to 2047 (T3H)
0 to 1023 (T3/T2) 1 to 256 None
LW register 0 H02 0 to 255 (T3H/T3/T2) 1 to 256 None
RW register 0 H03 0 to 999 (T3H)
0 to 511 (T3)
0 to 127 (T2) 1 to 256 None
D register 0 H04 0 to 8191 (T3H/T3)
0 to 4095 (T2) 1 to 256 None
F register 0 H05 0 to 32767 (T3H)
0 to 8191 (T3)
0 to 1023 (T2) 1 to 256 None
Expanded F register 1 to 15 H05 0 to 8191 (T3H/T3/T2) 1 to 256 None
(IC memory card)
*1
1 or 2 H06 0 to 65535 (bank 1) (T3H)
0 to 57343 (bank 2) (T3H) 1 to 256 None
S20 scan memory 1 or 2
*2
H10 0 to 1023 (T3H/T3/T2) 1 to 256 Yes
*3
S20LP scan memory
*4
1 or 2 H10 0 to 4095 (T3H) 1 to 256 None
EEPROM (D register) 0 H20 0 to 8191 (T3H/T3)
0 to 4095 (T2) Source (read)
1 to 256
None
Destination (write)
1 to 128 (T3H)
1 to 64 (T3)
1 to 32 (T2)
*1) Two format types of the IC memory card is available. They are 8 k words/bank (type: H05) and 64 k
words/bank (type: H06). Type H06 is available only in the T3H.
*2) Channel 1 (CH1) only for the T2.
*3) The status flag is created only when S20 is designated as transfer source.
*4) S20LP is available only with the T3H. The S20LP does not have the scan healthy map. Therefore
status flag is not created for S20LP.