Toshiba PROSEC T3H - Manual (Page 70)

68
PROSEC T3H
2. Expanded Functions
Inside the parameter (cont’d):
Status S20LP Ethernet
Abn 0: Normal complete
1: Error complete
Busy 0: Initial state
1: Transmission port busy
Status 0: Initial state
1: While send requesting
2: While waiting response
3: Complete
TermSTS H00: Normal complete
H01: Register designation error
H02: Response time-out
H03: Parameter error
H04: Register write protect
H05: (Reserve)
H06: Module error (send time-out)
H07: No send channel
H08: Invalid station No.
H09: Transfer size error
H0A: Boundary error
H0B: Transmission error
Bit 7 indicates the error is occurred
H0C: I/O no answer error whether self-station or target-station.
H0D: IC card designation error 0: Self-station
H0E: (Reserve) 1: Target-station
H0F: (Reserve)
Transmission error
information When TermSTS is H0B, the error information is stored. (0 for other cases)
For detailed information, refer to the S20LP or EN311 manual.
Example
RW030 3 1 0 Ethernet, channel 1
RW031 33 (H21) Request command H21: Register read/write
RW032 200 Transfer size: 200 words
RW033 5 Self-station F register
RW034 5000 Leading address: F5000
RW035 4 Target-station D register
RW036 4000 Leading address: D4000
RW037 50 Response time limit: 5 second
RW038 H71 H85 Target-station IP address:
RW039 H0A H62 133.113.98.10 = H85.H71.H62.H0A
RW040 1024 Target-station UDP port No.: 1024
Send requesting
RW060 0 0 1 0 0
RW061 0