Tandberg Data VXA-320 (VXA-3) - Manual (Page 67)

O CTOBER 2006 VXA-320 T APE D RIVE 53
P
OWER
S
PECIFICATIONS
P
OWER
S
PECIFICATIONS
This section lists the power specifications for the VXA-320 tape drive.
I
NTERNAL
T
APE
D
RIVE
The power specifications listed in this section are in addition to any
requirements for the enclosure in which it is installed.
Power Connector Pin Assignments
The VXA-320 power connector is compatible with power cables used for
standard 5.25-inch half-high devices. The enclosure’s power cable connector
must be an AMP 1-480424-0 series, or equivalent. Table 7-7 provides pin
assignments for the tape drive’s power connector.
Figure 7-2 Physical dimensions of the external tape drive
226.8
(8.93)
85.85
(3.38)
285.8
(11.25)
3
Table 7-7 Pin assignments for the power connector
Pin Assignment
1 +12 VDC
2 Ground, 12 VDC return
3 Ground, 5 VDC return
4 +5 VDC