Manually creating a master setup, Updating an existing master setup, Deleting a master setup – Telos ZephyrExpress User Manual
Page 104
MENUS
6-9
Manually creating a Master Setup
You can also create Master Setups by picking and choosing individual setups, letting the
system auto-create setups only for specfic menus, and telling the system not to change
other menus when the Master Setup is applied.
After you select
Create New
and enter a setup name, the screen will scroll down to show a
list of ZephyrExpress menus, such as
Codec
in the screen shot below:
Choose a menu setup to be stored with this Master setup. You can select from
•
Any existing setup for that individual menu;
• or
(custom)
, which will create a new menu setup with the same name as the Master
setup;
• or
(none)
, which will tell the Master setup to leave that menu’s settings unchanged.
After you’ve selected what this Master setup should do for each menu, select the
Go!
box.
You’ll be shown a confirmation screen; select
Yes
to store the setup.
Updating an existing Master Setup
After you select an existing Master setup in the
Name
field, you be given a scrolling list of
menus identical to the one used when manually creating a Master setup. Follow the in-
structions above to select an existing menu setup, a custom one, or none.
You can’t update a Master Setup that was preset by Telos ( indicated with an asterisk in its
name).
Deleting a Master Setup
After you select an existing Master setup in the
Name
field, select the
Go!
box. Then select
Yes
in the confirmation screen to delete the Master setup.
Deleting a Master Setup does not delete individual menu setups, even if they were auto-
created when you created the Master.
You can’t delete a Master Setup that was preset by Telos ( indicated with an asterisk in its
name). We’re very retentive about these things.