Telos ZephyrExpress - Manual (Page 59)

3-18 Z EPHYR E XPRESS HARDWARE
Monitor 1, Monitor 2 Headphone outputs
Stereo jacks with left on the tip, right on the ring, and ground on the sleeve. Monitor 2’s
front- and rear-panel headphone jacks have separate output buffers, so one can be used
to drive low-impedance headphones while the other drives high-impedance ones or an
unbalanced monitor amplifier.
Headphone Jacks
CONTACT FUNCTION
Tip Left
Ring Right
Sleeve Ground
Power Supply Jack
The 4-pin XLR connector is designed to be used with ZephyrExpress’ modular power
supply.
w
WARNING!
Be sure the supply is turned off at its switch, or disconnected from
the AC line, before plugging or unplugging this connector.
Failure to do so can erase ZephyrExpress memory settings and damage the unit.
We don’t recommend using any other power supply. If you must use a different power
source in an emergency be sure to turn on or off all voltages simultaneously.
Power connection
Serial Number
From Power
Supply