Telos ZephyrExpress - Manual (Page 70)

4-8 AUDIO OPERATIONS
The Monitor Mixers
MONITOR 1
Send
Routing Level
Receive
Routing Level
Receive Meters
Lock Indicators Mon 2
Headphone Jack
MONITOR 2
Routing Level
Send
Routing Level
Receive
There are two independent monitor mixers.
¥ MONITOR 1 has a stereo headphone jack and two XLR output jacks on the rear panel.
Its jacks are marked with gray circles, and its knobs have gray inserts.
¥ MONITOR 2 has stereo headphone jacks on the front and rear panel. Its jacks are
marked with white circles, and its knobs have white inserts.
Otherwise, the two mixers are identical. The following block diagram applies to both of
them.
Send Routing
A / B / A B / off
From Channel A SEND Bus
Send A
Pan
Send B
Pan
Send
Gain
Receive Routing
A / B / A B / off
Rcv A
Pan
Rcv B
Pan
Receive
Gain
Left
Headphone Amp
Right
Headphone Amp
Rear Panel
Headphone Jack
Front Panel
Headphone Jack
(Monitor 2 only)
Rear Panel
XLR Outputs
(Monitor 1 only)
From Channel A Rcv Codec
From Channel B Rcv Codec
From Channel B SEND Bus
Monitor Routing Switches
Each of the two Monitor SEND routing switches ( MONITOR 1 SEND MONITOR 2 SEND ) works
the same way, cycling through four choices:
¥ A routes the signal from the Channel A send bus to the monitor.