Telos ZephyrExpress - Manual (Page 20)

1-8 QUICK RESULTS
U
Turn the EDIT knob three clicks clockwise, to highlight ISDN .
T
Then tap the knob in toward the panel.
The display will change to look like this:
Turn the edit knob clockwise to highlight either SPID#1 , DN#1 , or MSN#1 , depending on
which type of number you entered in the form on page 1-4. The menu scrolls down as
you keep turning the knob.
Tap the edit knob in toward the panel again to start entering that number.
The display will change to look something like this, depending on what kind of number
you’ll be entering.
Use the numeric keys to enter the number.
Enter exactly the digits the phone company supplied you with. Leading and trailing zeros
are important. If you make a mistake, you can turn the
EDIT knob counterclockwise to
back up.
Once the number is completely entered, tap the EDIT knob toward the panel to confirm.
Turn the knob one click clockwise to highlight SPID#2 , DN#2 , or MSN#2 . Tap the knob,
then enter that number the same way. When you’re done entering the number, tap EDIT
to confirm.
If this line requires a prefix to reach an outside line (item 4 on the form on page 1-4), turn
the knob clockwise to highlight
Outside line prefix . Then enter the prefix the same
way you’ve entered the line identification numbers, and tap the knob to confirm.
D
Turn the EDIT knob counterclockwise to go back up to Switch Type , and tap it toward the
panel. The screen will look like this. If you’ve entered a SPID#1 , you should see it also.