Telos ZephyrExpress - Manual (Page 5)

Introduction v
Updates
How ZephyrExpress works is almost entirely determined by software. This
booklet is based on software version 1.2.1.
Power Supply
ZephyrExpress is powered by a separate modular power supply, which is self-
adjusting to any voltage between 100 - 250 VAC, 50 - 60 Hz. It connects to a 4-pin
XLR connector on the rear panel. The supply must be turned off at its switch, or
disconnected from the AC line, before plugging or unplugging this XLR
connector.
e
WARNING:
Do not use the XLR connector as an on/off switch!
Connecting or disconnecting the power supply while it is powered can erase
current ISDN setup and other user settings.
Trademarks
Telos Systems, the Telos logo, Zephyr, ZephyrExpress, and “The Best Way to
Hear from There” are trademarks of TLS Corporation. All other trademarks are
property of their respective holders.
Copyright
Copyright © 1999 by TLS Corporation. Published by Telos Systems, who
reserves the right to make improvements or changes in the products described
in this manual, which may affect the product specifications, or to revise the
manual without notice. All rights reserved.
Notice
All versions, claims of compatibility, trademarks, etc. of hardware and software
products not made by Telos mentioned in this manual or accompanying
material are informational only. Telos Systems makes no endorsement of any
particular product for any purpose, nor claims any responsibility for operation
or accuracy.
Warranty
This product is covered by a one year limited warranty, the full text of which is
in the Appendix section.