Telos ZephyrExpress - Manual (Page 126)

ISDN 7-11
Terminal Type: A
1010XXX: Yes
Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Elec-
tronic Key Telephone Sets (EKTS), shared directory numbers, accept special type of number,
intercom groups, network resource selector (modem pools), message waiting, hunting, in-
terLata competition, call waiting, etc.
Get from Telco: One or two SPID numbers, depending upon number of active B channels;
one or two directory numbers.
ZEPHYREXPRESS SETTINGS (FOR YOU TO ENTER)
Set Switch type to: Natl I-1
SPIDs : Enter one or two numbers, depending upon number of active B channels
AT&T Point-to-Point (Custom) (USA, Japan, Israel, some others)
Available on AT&T CO switches version 5E4.2 and above. This is the most basic possible
configuration of ISDN, but supports all ZephyrExpress functions. It is the most conven-
ient protocol for ZephyrExpress set-up because no SPIDs are required.
CO VALUES (TO TELL THE PHONE COMPANY):
Line Type (DSL class): Point-to-Point (PTP)
B1 Service: On Demand (DMD)
B2 Service: On Demand (DMD)
Maximum B Channels (MaxChan): 1 or 2
CSV Channels: Any
Number of CSV calls: 1
CSD Channels: Any
Number of CSD calls: 1 or 2
Terminal Type: A
Number Display: No
Call Appearance Pref: Idle
1010XXX: Yes
Turn off features such as: packet mode data, multiline hunt, multiple call appearances, Elec-
tronic Key Telephone Sets (EKTS), shared directory numbers, accept special type of number,
intercom groups, network resource selector (modem pools), message waiting, hunting, in-
terLata competition, call waiting, etc.