Tektronix 1740A/1750A - Manual (Page 69)

Using the Menus
1740A/1750A Series Waveform/Vector Monitor User Manual 3-14
Line Select Menu
Pushing the LIN SEL menu button enables the line select mode
and provides the line select menu display. The middle bezel
control is assigned to select the line number. The following
choices can be made using the bezel buttons.
1740A-- Series
H FIELD
—
ALL or 1of 2
H
1H or 15H (one line or 15 lines)
H NEXT FIELD
—
(appears only when 1of 2 FIELD is
selected.) Push the bezel button corresponding to
NEXT FIELD to sequence through the fields desig-
nated by the FIELD selection. A box flashes mo-
mentarily around the on-screen label to verify that
the selection has been made.
1750A-- Series
H
FIELD
—
ALL or 1of2 or 1of 4 or 1of8
H 1H or 15H (one line or 15 lines)
H NEXT FIELD
—
(appears only when 1of 2 , 1of4 , or
1of 8 FIELD is selected.) Push the bezel button
corresponding to NEXT FIELD to sequence through
the fields designated by the FIELD selection.
H ALT 2 FIELD
—
(appears only when 1of 4 FIELD is
selected.) Push the bezel button corresponding to
ALT 2 FIELD to toggle between the current field and
the second next field; for example, FIELD1 and
FIELD3 .
H ALT 4 FIELD
—
(appears only when 1of 8 FIELD is
selected.) Push the bezel button corresponding to
ALT 4 FIELD to toggle between the current field and
the fourth next field; for example, FIELD1 and
FIELD5 .