Tektronix 1740A/1750A User Manual
Page 72
Using the Menus
1740A/1750A Series Waveform/Vector Monitor User Manual
3-17
Recall
Use the left bezel control to select (outline) a preset for re-
call. Push
RECALL
to recall the stored instrument configura-
tion.
Recover
Push
RECOVER
to restore the front-panel setup that was in
effect before
RECALL
was pushed.
Store
To begin storing a setup, push
STORE.
Make sure the front-
panel controls are set as desired, and use the left bezel con-
trol to select the storage location (shown outlined).
Push
STORE IT
to store the current front-panel settings at the
outlined
PRESET
location. (Push the bezel button corre-
sponding to
RETURN
if storing is not desired. This will can-
cel and exit the
STORE
operation.)
Rename
Selecting
RENAME
will provide an on-screen display, assign-
ing the center and right bezel controls to
LOCATION
and
LET-
TER
.
Turn the center control to select the letter that will be
changed (move the box to the desired location within the
preset name). Turn the right control until the selected letter
changes to the desired new letter.
Push
RETURN
if renaming is not desired. All changes to the
name will be cancelled.
When the change has been made satisfactorily, select
AC-
CEPT
to store the new name.