TurboChef Technologies Residential Single and Double Wall Oven - Manual (Page 25)

OVEN
C
ONTROLS
AND
C
OOKING
-
THE
SPEEDC
OOK
OVEN
2.1
Speedcook Oven Controls
1. Analog Clock and Timer
Th e clock and timer run with advanced electronic
control knobs. To operate, see 2. Set Clock Knob and
3. Set Timer Knob.
2. Set Clock Knob
To set the time,
1. Press knob to extend.
2. Turn knob to set time.
3. Press knob back in to original position.
3. Set Timer Knob
To set the timer,
1. Press knob to extend.
2. Turn knob to set timer – up to 60 minutes.
3. Press knob back into original position.
NOTE: Th e timer does not begin counting down
until the knob is pressed back in. Th e oven will
chime four times at the end of the timer cycle.
4. Cook Navigator™
Consists of the Display (5), Start Key (9), Back Key
(10), Cancel Key (11), and Info Key (12).
5. Display
Th e display shows information relevant to the
current oven operation and/or user options.
6. CookWheel™ (inner knob)
Turn to navigate through the options on the display.
Press knob to select an option, begin a preheat cycle,
or initiate a cook cycle.
7. CookWheel™ (outer knob)
Turn to select a Speedcook mode, Self-Clean, or to
turn the oven off . Modes include: Air-Crisp, Bake,
Broil, Favorites, Dehydrate, Roast, and Toast.
8. Oven Light Switch
Press to illuminate the top cook cavity.
9. Start Key
Press to select an option, begin a preheat cycle, or
initiate a cook cycle.
NOTE: Pressing the “Start” key performs the same
function as pressing in the inner CookWheel knob.
10. Back Key
Press to return to the previous screen.
11. Cancel Key
Press to terminate a cook cycle or to return to the
main screen.
12. Info Key
Press to display information on the Oven Setup
(sound, units & measurements, display, and software
updates), Help Topics, and Oven Tips.
NOTE: When the oven is in the middle of a cook
cycle, you will not be able to access the Info screen.
1 2 3
12
5 4
11
6
10
7
9 8
Figure 2.1: Oven Controls