TurboChef Technologies Residential Single and Double Wall Oven - Manual (Page 31)

OVEN
C
ONTROLS
AND
C
OOKING
-
THE
SPEEDC
OOK
OVEN
2.7
- Brown Less: Select if the outside of the dish is
browning faster than desired.
- Cook and Brown Less: Select if dish is cooking
and browning more than expected, but requires
additional
cooking time.
If after 30 seconds the oven has not been addressed
(door opened or inner CookWheel knob pressed),
the oven will complete the cook cycle according to
the original settings.
NOTE: For food items with a cook time of 2:30
or less, the cook cycle does not pause at the 80%
complete mark.
NOTE: If the food item is done at this time,
remove it from the oven and press cancel to end the
cook cycle. If you end the cook cycle at this point,
the cook cycle will not be recorded in “View Last
Cooked (10)” (for more information on “View Last
Cooked (10), see page 2.3).
Happens When...
- Th e cook cycle is 80% complete.
Goes To...
- mode 2 if the user presses cancel.
- mode 8 after 30 seconds of inactivity, or if the
user selects “No Change,” “Cook Less,” “Brown
Less,” or “Cook and Brown Less.”
Mode 8: 100% Complete
Mode during which the cook cycle is 100%
complete. At the end of a cook cycle, a chime sounds
notifying the user that the food item is done. Th
e
user has the option to add additional cook time, if
desired. At this point in the cook cycle, the user can
choose one of the following four options:
- Cook More: Select if the outside meets expecta-
tions, but the inside needs to cook longer.
- Brown More: Select if the inside meets
expectations, but outside needs to cook longer.
- Cook and Brown More: Select if both the
inside and outside need to cook longer.
- Done Cooking this Dish: Select if no
adjustments
are needed.
NOTE: If the user selects “Cook More,” “Brown
More,” or “Cook and Brown More,” the user can
add up to 30% of the original cook time in 5-second
increments. Th
is can be repeated as many times as
necessary.
Th is option is available for 3 minutes. After 3
minutes of inactivity, the oven assumes the item is
done.
Happens When...
- Th e cook cycle is 100% complete.
Goes To...
- mode 9 if the user selects “Done Cooking this
Dish.”
- mode 6 if the user selects one of the “cook/
brown
more” options.
Mode 9: Remove Food from Oven
Mode during which cooking is complete, and the
food item is ready to be removed from the oven. Th
e
user has the option to “Save to Favorites,” “Cook
Another,” or “Done.”
WARNING: Dish and inside of oven/oven
door are hot! Use extreme caution.
NOTE: Th e display will not change until “Save to
Favorites,” “Cook Another,” or “Done” is selected or
until the oven is turned off .
Happens When...
- Th e user selects “Done Cooking this Dish”
from mode 8.
Goes To...
- mode 1 if the user turns the CookWheel to off .
- mode 2 if the user selects “Done.”
- mode 5 if the user selects “Cook Another.”
- Save to Favorites (see page 2.9), if the user
selects “Save to Favorites.”
NOTE: If the user selects “Cook Another,” the next
cook cycle will use the same settings as the previous
cook cycle. Th
is includes any adjustments made at
any point during the previous cook cycle.