TechniSat TechniBox VIACAM - Manual (Page 23)

6.13.3 Viewing the Electronic Programme Guide
> Switch on your receiver as well as your TV set.
> Press the EPG key on the remote control of your receiver.
The Electronic Programme Guide will now be displayed on the screen. The list will
include the programmes preprogrammed at the factory, or those selected by you. You
can now use the EPG functions to set (
Set ) the programme, to Preselect it, or to
mark it for timer programming ( Activate VCR )
You can also obtain information on the content of various programmes from the EPG func-
tion.
6.13.4 Now (Display of current programme contents)
The first tables to be displayed will be those of programmes currently being broadcast
(
Now ).
> You may now utilise the EPG functions as per Point 6.13.3.
> Press the
right arrow
key to view the table
Next
(see Point 6.13.5)
Or
>
Press the TV/Radio key to return to normal signal reception.
6.13.5 Next (Display of immediately following programmes)
> Use the right arrow key to select the Next table (programmes immediately follo-
wing current programmes)
23
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 23