TechniSat TechniBox VIACAM - Manual (Page 5)

Inserting a CA module: Please follow the instructions set out by the card and module manufacturer Insert the appropriate smart card into the corresponding CA module Now carefully insert the module in the direction of the arrow (arrow should be visible from above) into a free slot, inserting it as far as possible. T
o
remove the card, press the Eject button.
Power on/standby
LNB input
T
errestrial antenna in
RS 232
connetion/
interface
USB
connetion/
interface
Audio outputs digital/analog
Scart AUX
Scart VCR
Mains power
connection
Power switch
Scart TV
LED display
Programme down/up
Eject button for ca moduls
VIACCESS card reader
CA slot A CA slot B
HF out
LNB output
ansicht1_e.qxd 25.08.00 08:36 Seite 4