TechniSat TechniBox VIACAM - Manual (Page 32)

New channels added to the User List will be positioned at the end of the list, and can then be
sorted to any desired position.
7.2 Sorting Channels
In order to sort the User List of channels according to your own preferences, proceed as fol-
lows:
>
Use the Menu key to display the Main Menu
> Use the
up/down arrow
keys to mark
TV Programmes
, if you wish to sort TV
channels, or Radio Programmes , if you wish to sort radio stations.
> Confirm with the OK key.
The sub-menu
>Programmes
will be displayed.
> Now use the up/down arrow keys to mark the entry Sort.
> Confirm with the OK key.
The
User Channel List
will be displayed.
> Use the up/down arrow keys to mark a channel whose position in the list you want
to change.
> Confirm with the
OK
key.
> Now you can use the up/down arrow keys to place the marked channel at any
position in the list where you would like it to be.
Or
Use the numeric key pad to enter the position in the list where you would like the
channel to appear. The channel number will be displayed on the menu.
> Use the
OK
key to insert the channel at the preferred position.
> Repeat this process until the list conforms to your preferences.
> Press the Menu key to return to normal operation.
7.3 Blocking Channels
You have the facility to block specific channels (parental lock). A blocked programme will
only be shown on the TV screen if you enter your personal PIN after selecting the channel.
This number need to be entered only once during an operating session, i.e. the blocking will
only become operative again the next time the receiver is switched on (standby).
In order to block a specific channel, follow this procedure:
>
Press the
Menu
key to display the
Main Menu
.
> Use the up/down arrow keys to select TV Programmes , if you wish to block
viewing of TV channels, or Radio Programmes if you wish to block radio stations.
> Confirm with the
OK
key.
The sub-menu >Programmes will be displayed.
> Use the
up/down arrow
keys to mark the entry
Lock
.
> Confirm with the
OK
key.
The User List will be displayed.
> Use the
arrow
keys to mark the channel/station you wish to have blocked.
> Confirm with the
OK
key
The channel will be marked with a red cross in the list.
> You can repeat this process as often as required to block all channels you wish to
block.
> Press the Menu key to return to normal operation.
> In order to activate the parental control function, you must still enter
your personal PIN in the following point Changing the PIN, and then
activate the parental lock as described in Point 5.2 (Basic Settings)
32
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 32