TechniSat TechniBox VIACAM User Manual
Page 34
>
Use the
up/down arrow
keys to mark the entry
EPG
.
>
Press the
OK
key to display the sub-menu
EPG.
>
You may now proceed to use the
arrow keys
in order to select individual channels.
Press the
OK
key to add a channel to the Electronic Programme Guide (cross
appears in display) or delete a channel from the guide (cross disappears from dis-
play).
>
Use the
up/down arrow
keys to move around the list one line at a time.
>
Use the
left/right arrow
keys to move around the list one page at a time.
>
When you have completed programming the EPG in this manner, press the
Back
key to return to the previous menus.
Or
>
Press the
Menu
key to resume normal operation.
Once you have customized the Electronic Programme Guide to your personal preferences,
the process of data acquisition by the EPG can be started manually as follows:
>
Use the
On/Standby
key to switch the receiver off (standby).
>
Press the key
EPG
within 5 seconds.
The receiver will now carry out the data acquisition procedure. This is shown by the
letters
EPLd
in the display.
>
The data acquisition process can be interrupted by switching on
(On/Standby
key)
the receiver.
34
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 34