TechniSat TechniBox VIACAM - Manual (Page 44)

LNB power supply:
LNB power
Max. 400 mA, double-insulated
LNB voltage vertical <14.0 V no load, 11.5 V at 400 mA
LNB voltage horizontal <20 V no load, >17.5 V at 400 mA
LNB switched off in Standby mode
22-kHz Modulation: 22 kHz, amplitude 0.6 V +/- 0.2 V
Programme memory/ Satellite positions:
No. of programmes favourites list TV
999 TV programmes (F 1 to F 999)
No. of programmes favourites list Radio: 999 radio programmes (r 1 to r 999)
Number of Programmes:
Bouquet lists TV/Radio
total of 4000 programmes in bouquet lists possible
Number of active satellite positions:
Max. 4 (DiSEqC 1.0, SAT POSITION/ SAT OPTION)
Total number of satellite positions: 32
One home transponder is stored in memory for each of the 32 satellite positions. This transponder facili-
tates automatic channel/programme search on each satellite position.
EPG Data:
EPG preview
Maximum 7 days in advance
Memory capacity 300 kBytes
Programmable for 999 programmes, recommended 50 days
Timer:
Events
Maximum 128 events, one year in advance
Remote Control System RC-5
Sub-system address 8
(SAT 2)
Modulation frequency 36 kHz
Infrared wavelength 950 nm
Power supply:
Mains switch:
Power usage:
< 35 W (in operation, horizontal polarisation, 400 mA supply to LNB)
< 26 W (in operation, excluding LNB)
< 3 W (in standby mode)
Mains voltage:
180 V….250 V /50 Hz AC
General:
Ambient temperature
+ 15° C ….+ 35° C
Humidity < 80 %
Dimensions (WxLxH) 370 mm x 270 mm x 65 mm
Weight 1.6 kg
44
Your receiver bears the CE control label, and complies with all relevant EU standards.
Subject to change and printing errors. Correct at 08/00
TechniSat and VIACAM are registered trademarks of
TechniSat Digital GmbH
P.O.Box 560
D-54541 Daun,Germany
www.technisat.de
333_01
bed_anl_ViaCam_engl_2.qxd 30.03.01 14:21 Seite 44