Texas Instruments 5000 - Manual (Page 81)

2.10 Making Backups of System
Software
The Notebook is preloaded with the DOS/Windows operating system
software, Jazz 16 Sound Utilities, PCMCIA drivers, BatteryPro Software, and
other configuration software.
Supplied with your system is a diskette containing backup and restore
utilities, tools and diagnostics. Prior to extended use of the notebook, create
a backup set of system software using the Backup Utility from the Startup
menu or the Disk Maker Utility in Windows (during the backup process, you
will be prompted to insert a number of blank pre-formatted diskettes). In
the event of a disk problem, you can restore your system using the Restore
Utility on the diskette and the set of backup diskettes you’ve just created.
n Note: At initial release, full backup requires 22 diskettes for domestic units,
23 diskettes for international units. A complete set of notebook software on
3-1/2" diskettes may also be purchased from Texas Instruments by sending
in the Software Fulfillment Card.
2.11 Loading Application Software
For assistance in loading Application Software, refer to the TravelMate 5000
Online User’s Technical Reference Manual.
2.12 Securing Notebook to
Workstation
The notebook is equipped with a steel security ring that may be cabled
connected to your workstation. As shown in figure 2-18, the security ring is
located on the right side of the notebook. Release the ring using a thin
sharp instrument as shown in Figure 2-18. Then attach an anchored
security cable to the notebook.
Figure 2-18 Notebook Security Ring
Installation 2-21