Texas Instruments 5000 - Manual (Page 85)

3.2.2.2 Rear Connector Door Release Button
The Rear Connector Door Release Button, located in the center of the rear
panel of the notebook as shown in Figure 3-1, is used to open the two rear
panel connector doors when attaching external devices or installing the
notebook onto a "Docking System" option.
3.2.3 Notebook LED Displays
The notebook is equipped with three groups of LED displays including:
•
Keyboard Mode LEDs
•
Disk Activity and Turbo Mode LED indicators
•
Battery Charge Condition LEDs
These notebook display groups are shown in Figure 3-1 and described in
the following paragraphs.
3.2.3.1 Keyboard Mode LEDs
The notebook contains three "keyboard mode" indicators just above the
keyboard on the left side (notebook cover open). These LEDs include:
•
CAP (Caps Lock) Indicator- this LED indicates that the keyboard is
locked in the Uppercase mode. To switch to the Lowercase mode, press
the Caps Lock key on the keyboard.
Embedded Point Device
Select Buttons
Figure 3-2 The Point
3-4 Operating Instructions