Transition Networks CPSMC0800-100 - Manual (Page 13)

13
CPSMC0800-100 PointSystem ™ Chassis
po
wer supply
3.2 Auxilliary Power Supply
The CPSMC0800-100 can also be supplied with auxilliary power through the
Auxilliary Power Inlet, located on the back panel. The External Power Converter and
additional power cord are sold separately.
To power the CPSMM0800-100 8-Slot chassis through the Auxilliary Power Supply:
1. Connect the female end of the External Power Converter to the Auxilliary Power
Inlet on the back of the 8-Slot chassis.
2. Connect the female end of the power cord to the male end of the External Power
Converter.
3. Plug the male end of the power cord into the correct voltage AC rack or wall
socket.
4. Verify that the chassis is powered by observing the illuminated Power LEDs on
the Slide-in-Modules and by the fan operation.
Tech Support: 7am-6pm CST (GMT -6:00) 1-800-260-1312 International: 00-1-952-941-7600
Mpls, MN 55344
Input Power:
110-240 VAC
1.6A max. (60W max)
50/60 Hz
Auxilliary Power Inlet
External Power
Converter
Power Cord