Chassis, Panel fastener screw – Transition Networks CPSMC0800-100 User Manual

Page 7

Advertising
background image

7

CPSMC0800-100 PointSystem

Chassis

slide-in-modules

2.1.2

Installing the Media Converter Slide-in-Modules

CAUTION: Wear a grounding device and observe electrostatic discharge precau-
tions when installing the Media Converter Slide-in-Module(s) into the chassis.
Failure to observe this caution could result in damage to, and subsequent failure
of, the Media Converter Slide-in-Module(s).

NOTE: Media Converter Slide-in-Modules can be installed in any installation slot,
in any order.

To install the Media Converter Slide-in-Module into the CPSMC0800-100 8-Slot
chassis:

1. Remove the Media Converter Slide-in-Module protective plate from the instal-

lation slot by removing the one (1) screw that secures the plate to the front of
the chassis.

NOTE: If the Slide-in-Module requires two slots, remove the protective plates
from two (2) adjacent installation slots.

2. Align the Media Converter Slide-in-Module with the chassis installation slot so

that the panel fastener screw is at the left of the Media Converter Slide-in-
Module.

3. Carefully slide the Media Converter Slide-in-Module into the installation slot.

NOTE: Ensure that the Media Converter Slide-in-Module is firmly seated against
the back of the chassis.

4. Install the Media Converter Slide-in-Module by carefully rotating the attached

panel fastener screw clockwise to secure the Media Converter Slide-in-Module
to the chassis.

5. Repeat steps 1 through 4 for additional Media Converter Slide-in-Module(s).

Tech Support: 7am-6pm CST (GMT -6:00) 1-800-260-1312 International: 00-1-952-941-7600

10BASE-T

INPORT

MCCM10

MGMT

MASTER

OUTPORT

12C

12C-1

TERM

INIT

RX

TX

LNK

PWR

RESET

DB-9

CFETF1

10

SPD

PWR

FRX

CRX

FLNK

CLNK

10/100TX

RX

TX

10/100SX

LKS

PWR

LKM

Multimode

Singlemode

TX

RX

TX

RX

CFETF1

10

SPD

PWR

FRX

CRX

FLNK

CLNK

10/100TX

RX

TX

10/100SX

CPSMC-0800
8-Slot Chassis

Mpls, MN 55344

Mpls, MN 55344

Input Power:

Input Power:
110-240 VAC

110-240 VAC
1.6A max. (60W max)

1.6A max. (60W max)
50/60 Hz

50/60 Hz

LKS

PWR

LKM

Multimode

Singlemode

TX

RX

TX

RX

Panel Fastener Screw

Advertising