5snmp agent in the management module, Snmp, 1 snmp hardware connections – Transition Networks CPSMC0800-100 User Manual
Page 19: Chassis, Db-9 serial port
19
CPSMC0800-100 PointSystem
™
Chassis
SNMP
Tech Support: M-F 7am-6pm CST (GMT -6:00) 1-800-260-1312 International: 00-1-952-941-7600
5
SNMP Agent in the Management Module
Both Management Modules (CPSMM-120 and (CPSMM-200) have an SNMP
(Simple Network Managment Protocol) Agent installed in the module that allows
remote managment of networked devices.
The SNMP agent includes the Transition Networks PointSystem™ Command Line
Interface (CLI) and an embedded Telnet server.
These tools allow the network adminsitrator to configure and manage the
CPSMC0800-100 8-Slot from an attached terminal or from a remote, networked
computer.
In addition, Transition Networks FocalPoint™ software can be installed in the net-
worked computer to provide a graphical user interface to monitor the Conversion
Center.
5.1
SNMP Hardware Connections
The SNMP software can be accessed either through the Management Module’s DB-
9 serial port or through the RJ-45 Ethernet™ port.
DB-9 Serial Port
The DB-9 serial port allows the network administrator to configure and manage the
CPSMC0800-100 8-Slot chassis using the SNMP Command-Line Interface (CLI) at
an attached terminal or terminal emulator.
Use a null modem cable to attach a terminal to the DB-9 serial port on the
Management Module as shown.
10BASE-T
INPOR
T
CPSMM200
OUTPOR
T
12C
12C-1
TERM
INIT
RX
TX
LNK
PWR
RESET
DB-9
10BASE-T
RX
TX
LNK
PWR
RESET
SERIAL
CPSMM120
RJ-45 Ethernet Port
CPSMM-200
CPSMM-120
DB-9 Serial Port
10BASE-T
INPORT
MCCM10
MGMT
MASTER
OUTPORT
12C
12C-1
TERM
INIT
RX
TX
LNK
PWR
RESET
DB-9
CFETF1
10
SPD
PWR
FRX
CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode
Singlemode
TX
RX
TX
RX
CFETF1
10
SPD
PWR
FRX
CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode
Singlemode
TX
RX
TX
RX
CPSMC-0800
8-Slot Chassis
Mpls, MN 55344
Mpls, MN 55344
Input Power:
Input Power:
110-240 VAC
110-240 VAC
1.6A max. (60W max)
1.6A max. (60W max)
50/60 Hz
50/60 Hz
Attached terminal or terminal emulator
connected to the DB-9 serial port
via null modem cable.