Transition Networks CPSMC0800-100 - Manual (Page 22)

22
CPSMC0800-100 PointSystem ™ Chassis
Tech Support: M-F 7am-6pm CST (GMT -6:00) 1-800-260-1312 International: 00-1-952-941-7600
Technical Specifications
For use with Transition Networks Model CPSMC0800-100 or equivalent.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the
date of manufacture.
Dimensions 17 x 10.4 x 1.8 inches (432 x 264 x 46 mm)
Shipping Weight 8 lbs. (3.6 kg)
Power Input 100-240VAC, 50/60Hz, 18-72VDC
Power Consumption 60 Watts*
*Refer to the power consumption data for each individual Media Converter Slide-in-Module (provided
in the User’s Guide shipped with the Media Converter) to determine optimum site configuration.
MTBF (Mean Time Before Failure) MIL217F2 V5.0 (hrs) Bellcore7 V5.0 (hrs)
without fans 43,277 114,896
with three (3) fans 22,972 61,715
Environment
Tmra*: 0 to 40°C (32° to 104°F )
Storage Temperature: -40 to 80°C (-40 to 176°F )
Humidity 5 to 95%, non condensing
Altitude 0 to 10,000 feet
*Manufacturer’s rated ambient temperature. Refer to the power consumption data for EACH model
Media Converter Slide-in-Module (provided in User’s Guide shipped with Media Converter Slide-in-
Module) to determine optimum site configuration.
Compliance EN 55022 Class A; EN 55024; FCC Class A; UL Listed, CE Mark
Warranty Lifetime
CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare Into Beam Or View Directly
With Optical Instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
DECLARATION OF CONFORMITY
Name of Mfg: Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model: PointSystem ™ Chassis
Part Number: CPSMC0800-100, CPSMC0810-100
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the PointSystem ™ Chassis to which this declaration refers
is in conformity with the following standards.
EN 55022:1994; EN 55024:1998; FCC Part 15 Class A; UL 1950; 21 CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
_April 1, 2003_____
Stephen Anderson, Vice-President of Engineering Date