Interfaces, Interface settings for user 1 and user 2 – Tally Genicom 5040 User Manual
Page 131
User guide
Interfaces
123
Interfaces
Your printer offers the possibility of operating either via a parallel, a se-
rial or a USB interface. There is a printer model with a second serial in-
terface. This chapter informs you about the interfaces and describes the
communication between your computer and the printer.
Interface settings for User 1
and User 2
Your printer allows you to set and use two independent menu config-
urations for the selection of the interfaces (User 1/User 2).
It is possible, to select different intefaces for User 1 and User 2 (e.g.
User 1: serial interface and User 2: parallel interface).
It is also possible to select the same interface for User 1 and User 2. If
so, any changes of the interface settings in menu mode (see
, page 60) for one user will be transferred to the other user.
D