Tally Genicom 5040 - Manual (Page 66)

Menu User guide
58
Code Page 437*, 850, 860, 863,
865, 851, 852, 853,
855, 857, 866, 869,
USSR Gost, 864,
437G, 920, 858, 923
ISO 8859-2 East
Europe, ISO 8859-5
Cyrillic, ISO 8859-7
Greece, ISO 8859-8
Hebrew
1250 Windows
Latin2, 1251 Win-
dows Cyrillic, 1252
Windows Latin1,
1253 Windows
Greek,1254 Win-
dows Latin5, 1255
Windows Hebrew,
1256 Windows Ara-
bic, 1257 Windows
Baltic Rim Selects the character set. These character
sets can be used according to the selected
emulation.
The character sets are not necessarily avail-
able for all fonts; see also
Available code
pages and fonts, page 104 .
MENU
PAPER FORMAT Line space 1/6 *
1/5
Sets the line density in lines per inch.
1/6 = 6 lines per inch
Form length
1)
6 Lines
I
68 Lines *
I
90 Lines
A4
Sets the form length either via line formats or
the standard format A4.
Please note that the adjustment in lines
depends on the selected LPI. For example 6
LPI at a selected line number of 90 lines
results in a formlength of 15 inches (90 lines/
[6lines/inch]) = 15 inches).
Top of form pos. 0/60
10/60
*
30/60
60/60
Sets the position of the first printing line. The
factory setting for the first printing position is
10/60" (4,23 mm). This is equivalent to the
second line from the top.
Bottom edge
1)
0/60 *
30/60
Sets the position of the last printing line.
Line length 80 * (Epson/IBM)
90 * (Olivetti)
94
Sets the line length; unit is number of charac-
ters at a character density of 10 cpi.
Left edge 1 0 *
I
10
Sets the left margin; unit is number of charac-
ters at a character density of 10 cpi.
1) Only in Epson and IBM emulation
2) Only if MSR-H is installed
3) Only for printer model with second serial interface
Parameter group Parameter Possible settings Description