Tally Genicom 5040 - Manual (Page 14)

Installation User guide
6
Placing your printer Place the printer on a solid, flat, surface, ensuring that the printer is po-
sitioned in such a way that it can not topple, and that there is easy access
to the control panel and paper input devices. Also ensure that there is
sufficient space for the printed output.
The power supply cable may be damaged if the paper edges con-
stantly chafe the insulating sheath. The user must always ensure
that there is sufficient distance between the power supply cable
and the paper.
Location Minimum space
Left and right side of the printer 1 cm
Top of the printer 2 cm
Rear of the printer to ensure sufficient ventilation 10 cm
to print on a DIN A4 sheet 12 cm
to print with a built-in MICR 15 cm
min. 1 cm min. 1 cm
min. 2 cm
min. 10 cm
STOP