Tally Genicom 5040 User Manual
Page 83
Advertising
User guide
Troubleshooting
75
Press the two green release levers on both
sides of the panel and lift the panel up. Then
remove the jammed paper by pulling it in di-
rection of the arrow out of the printer.
Close the main frame by pressing the colored
section in the middle of the frame as shown by
the white arrow and ensure both left and right
hand sides of the frames are fully latched.
Close the cover. The printer is now ready to
operate and to be switched on again.
We recommend to check the
printer's operation by performing
a printout of the parameter set-
tings (see section
Advertising