Tally Genicom 5040 - Manual (Page 61)

User guide Menu
53
Printing out the status
page The printer has a function that allows you to printout the current pa-
rameter settings.
There are two ways to print out the parameter settings.
` Power on + EJECT key
` Selection of “Test Print Status Page” in menu mode
Power on + EJECT key
Power the printer off.
Press and hold the EJECT key while switching
on the printer.
The LCD displays Print StatusPage Load
Paper. Release the EJECT key.
Insert the paper in the printer. The LCD dis-
plays Print StatusPage Printing... and the
printout of the status page is carried out.
The paper will be ejected once printing is com-
plete.
While printing, you can use the STOP key to
pause the printing and LCD will display Print
StatusPage Stop. You can resume the print-
ing by pressing the STOP key again.
If EJECT key is pressed in the Pause state, pa-
per will be ejected and a reset will be per-
formed.
EJECT USER
SET UP
1
2
STOP
Print StatusPage
Load Paper
EJECT USER
SET UP
1
2
STOP
Print StatusPage
Printing...
EJECT USER
SET UP
1
2
STOP
Print StatusPage
Stop