Tally Genicom 5040 - Manual (Page 59)

User guide Menu
51
Selecting the LC display
language This section describes how to make settings in the menu, using the se-
lection of the national language as an example.
This example shows how to change from the English language to the
German language. The same procedure applies to the other languages
(French, Italian and Spanish).
Make sure that the printer is in menu mode (see section
Calling up the
menu
, page 46).
Press the STOP key.
Press the EJECT key several times, until in the
LCD display appears:
Press the STOP key. An asterisk appears in the
display.
Press the EJECT key.
Press the STOP key.
In the LCD display appears:
EJECT USER
SET UP
1
2
STOP
MENU
USER
EJECT USER
SET UP
1
2
STOP
Default Set
User1
EJECT USER
SET UP
1
2
STOP
Language
English
EJECT USER
SET UP
1
2
STOP
Language
English *
EJECT USER
SET UP
1
2
STOP
Language
German