Tally Genicom 5040 - Manual (Page 65)

User guide Menu
57
Menu parameters The following section introduces and explains all the possible menu
settings. The default setting is marked by an asterisk (*)
Parameter group Parameter Possible settings Description
MENU
USER Default Set Off *
All
User 1
User 2
All sets all parameters to the default settings.
User 1 sets all parameters of User 1 to the
default settings.
User 2 sets all parameters of User 2 to the
default settings.
Coyp User User1 to User2 *
User2 to User1
Copies the settings of User 1 to User 2 and
vice versa.
Select User User1 *
User2
Defines if User 1 or User 2 is loaded after pow-
ering on the printer.
Change User User1 *
User2
Defines if the parameter settings of User 1 or
of User 2 are changed.
Language English *
German
French
Spanish
Italian
Selects the display language.
MENU
CHARACTER Character Pitch 10 CPI *
12 CPI
15 CPI
17 CPI
20 CPI
24 CPI
Proportional
Sets the characters per inch (character pitch).
The higher the parameter the smaller the char-
acter spacing.
If Proportional is selected, only the actually
required space for the character width is used.
Font Draft *
Courier
Roman
Sans Serif
Script
Bold
Gothic
Prestige Elite
Orator
OCR-A
OCR-B
This parameter selects the character style per-
manently.
1) Only in Epson and IBM emulation
2) Only if MSR-H is installed
3) Only for printer model with second serial interface