Tally Genicom 5040 - Manual (Page 75)

User guide Troubleshooting
67
Problems with the paper feed
The paper is not fed in 1. Check that the correct media type is selected in the menu, if
necessary select the correct media type. See section
Media ,
page 59.
2. Check if the right edge of the document is positioned inside the
area between the left side of the symbol and the right edge of
the document support. See section
Inserting a document ,
page 27.
3. Make sure that the paper meets the values of the paper specifi-
cations. See section
Paper specifications , page 85.
Problem Corrective action