Tally Genicom 5040 - Manual (Page 32)

Control panel User guide
24
Key functions when powering on
STOP key
By pressing the ON/OFF key and the STOP
key at the same time, you will activate the
“Hex dump”. Keep the STOP key pressed un-
til Hex Dump NO PAPER appears on the
LCD display.
Refer to the section
Hex Dump
, page 63, for a
description of how to activate/deactivate and
perform the test printout.
EJECT key
By pressing the ON/OFF key and the EJECT
key at the same time, you will activate the
printout of all current parameter settings (sta-
tus page). Keep the EJECT key pressed until
Print StatusPage Load Paper appears on
the LCD display.
Refer to the section
Printing out the status pa-
ge
, page 53, for further details on the status
page.
EJECT USER
SET UP
1
2
STOP