Temco Tool 36RDVN - Manual (Page 44)

44
RDVN Series Direct Vent Gas Fireplace
20007628
Limited Warranty
TEMCO Fireplace Products Direct Vent Gas Fireplaces
Model Number: ____________________
Serial Number: _____________________
Date of Installation: ____/____/____
Purchased From: ___________________
This warranty is limited to CFM Fireplace Products
Direct Vent Gas Fireplaces (henceforth, Product) manu-
factured by CFM Corporation (henceforth, CFM).
ONE YEAR WARRANTY
CFM warrants all components of the Product to be free
of defects in materials and workmanship for a period of
one year from the date of installation, with the exception
of the warranty on logs and ember base. If, by the sole
determination of CFM, any component covered under this
warranty is found to be defective, CFM will, at its option,
repair or replace the defective component at no charge
and will pay labor cost incurred as specified in the current
CFM Labor Allowance Schedule, 71313. If CFM deter-
mines replacement or repair is not economically practical,
CFM will, at its option, refund the purchase price of the
Product. Date of installation and purchase price must be
verified by acceptable proof of purchase.
This warranty covers only parts and labor as provided
above. In no case shall CFM be responsible for materials,
components or construction which are not manufactured
or supplied by CFM, or the labor necessary to install,
repair or remove such materials, components or con-
struction.
NOTE: If allegedly defective components need to be re-
turned by CFM in connection with the above warranties,
frieght or postage charges must be prepaid.
QUALIFICATIONS
For the above warranties to apply:
The Product must be installed by a qualified installer;
strictly in accordance with CFM installation instruc-
tions, and in compliance with local codes and ordi-
nances. The logs must be placed strictly in accordance
with the arrangement described in the installation instruc-
tions.
The Product must be operated and maintained according
to the instructions furnished. Alteration of the Product
in any way is prohibited and voids any and all war-
ranties. Removal of the data plate alters the Product
and voids the warranty.
The installer must have completed the installation
and Startup Checklist, a copy of which must be sub-
mitted along with proof of purchase, to obtain prior
approval for warranty repair or replacement and to
affect a warranty claim. The Checklist is found on
Pages 41 and 42 of this manual.
The limited warranty applies only to the original owner of
the Product or the original owner of the dwelling in which
the Product was installed. Use of any parts other than
genuine factory provided replacement parts shall void
this warranty.
Limitations
CFM is not responsible for any incidental or consequen-
tial damages caused by possible defects in the Product.
The duration of any implied warranty with respect to the
Product is limited to the duration of the foregoing warran-
ties.
CFM is not responsible for any warranty repair (material
or labor) for defects created by improper field conver-
sions.
Some states and provinces do not allow exclusion of inci-
dental or consequential damages or limits on the duration
of implied warranties, so these limitations may not apply
to you.
Warranty Fulfillment
Claims require specific agreement and consent from
CFM Technical Services prior to performing any war-
ranty repair or replacement. CFM reserves the right
to investigate any and all warranty claims. The ap-
pliance must not be removed prior to such investigation
other than on direction from CFM.
Please provide the following information when com-
municating with CFM Technical Services, its Dealers or
Distributors regarding service under this warranty.
CFM reserves the right to decide on the method of settle-
ment (if any). This limited warranty is given in lieu of any
other expressed or implied warranty, and supersedes all
other CFM Product warranties.