Toshiba E-STUDIO 850 - Manual (Page 134)

132
5.USING THE EDITING FUNCTIONS
7.EDITING (Cont.)
5
3 Press the [TRIM] (or [MASK]) button.
4 Place the original with its face up on the
original glass.
• Set the original face up with its bottom toward you and fit its top
left corner against the top left corner of the original glass, and
align it with the original scales.
Do not place heavy objects (9 lb. or more) on the original glass and
do not press on it with force. Breaking the glass could injure you.
5 Specify the area. Using the original scale
on the left and the inner (top) scale, read
the following 4 values:
X1: Distance from the top left to the left edge of the
specified area
X2: Distance from the top left to the right edge of the
specified area
Y1: Distance from the top left to the upper edge of the
specified area
Y2: Distance from the top left to the lower edge of the
specified area
• The marks of the original scale have a 2 mm (0.08") pitch.