Toshiba E-STUDIO 850 - Manual (Page 42)

40
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Changing the setting of paper size
If the setting of the paper size registered in the equipment does not correspond to the one in the drawer, it
could cause a paper jam. In this case, replace the paper corresponding to the setting of the paper size (
P.37 “Placing paper in the drawer”), or change the setting of the paper size according to the following pro-
cedure.
2 Press the [USER] button on the touch panel to enter the user setting
menu, then press the [GENERAL] button.
3 Press the [DRAWER] button on the touch panel.
1 Press the [USER FUNCTIONS] button on
the control panel.