Toshiba E-STUDIO 850 - Manual (Page 71)

69
2
3 Press the [NON STANDARD] button on the touch panel.
4 Set each dimension following the procedure below.
Using the digital keys
Key in the value in [Length] and press the [SET] button on the touch panel. Set the width in the same
way and press the [ENTER] button.
Recalling dimensions registered in the memory
Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall the dimension
data registered previously, and then press the [ENTER] button.
• Maximum paper size to be set: 297 mm (11.69") (length) x 432 mm (17.01") (width)
• To register the dimension data in the memory, see P.70 “Registering non-standard size in the memory”.
• Set other copy modes as required.
5 Press the [START] button on the control panel.