Toshiba E-STUDIO 850 - Manual (Page 298)

296 10.WHEN THIS MESSAGE APPEARS
10
4. “Examine stapler”
This message appears when the staples in the Finisher (optional) are jammed. To remove them, follow the
procedure below.
1 Open the front cover of the Finisher.
2 Lower the lever of the stapler to release
the lock, and then take out the staple car-
tridge.
3 Lower the guide holding the knob.
A: Stapling area
Do not touch the stapling area. The stapler could injure you.
A