Toshiba E-STUDIO 850 - Manual (Page 250)

248
8.JOB STATUS
5.Print Status Display (Cont.)
8
2 Place the specified size of paper on the bypass tray, and then press
the [START] button.
• Printing is performed. Press the [JOB STATUS] button.
Printing by placing appropriate size of sheets in the drawer
2 Press the drawer button whose size you want to change on the touch
panel.
• You can select the desired drawer with the paper source selection ( / ) buttons.
3 Place paper in the corresponding drawer.
1 Press the blinking [JOB STATUS] button.