Toshiba E-STUDIO 850 - Manual (Page 286)

284
9.BLINKING GRAPHIC SYMBOLS
4.Jam Symbols (Cont.)
9
8 Close the bypass cover.
9 <External Large Capacity Feeder>
Install the External Large Capacity
Feeder to the equipment.
(See P.268 for cautionary points regarding separation/
installation and moving of the options.)
10 <Finishing device>
While pressing the button, separate the
finishing device from the equipment.
(See P.268 for cautionary points regarding separation/
installation and moving of the options.)
11 Open the exit cover.
12 Remove the paper from the cover side.
A: Reverse unit
B: Guide plate
Do not touch the metal area of the reverse unit and the guide plate.
It could burn you.
B A