Toshiba E-STUDIO 850 - Manual (Page 312)

310
10.WHEN THIS MESSAGE APPEARS
11.“Check paper size setting on control panel for drawer N” (Cont.)
10
5 Place paper on the bypass tray and select the paper size.
P.63 “6.Bypass Copying”
6 Place the original and try to copy again.
During printing from the FAX or Printer (using a drawer)
2 Remove the jammed paper.
P.267 “4.Jam Symbols”
4 Turn the power ON.
1 Turn the power of the equipment OFF.
• You cannot shut down the equipment.
3 Pull out the drawer mentioned in the
message. Then remove all paper in it.