TC electronic SDN BHD 48 - Manual (Page 32)

SYSTEM SETTINGS
30
Access the System Settings page by pressing the System Settings tab:
Buffer Size
1 System
Press to enter the page holding the system settings.
2 Buffer Size
The buffer size* can be set from 32 to 8192 samples.
The higher buffer setting, the longer latency through
Konnekt. The default buffer size is set to 256
samples. The driver latency is also indicated in ms
(milliseconds).
The displayed latency is the driver latency only! To
calculate the complete latency in your setup you
need to add the latency of converters, host (DAW),
plug-ins and e.g. DPC latency.
You should only increase the buffer size if you
experience problems such a clicks and pops in the
sound.*
* Relevant for PC version only. On Mac computers buffer size
is set in the audio application. For instance in Logic Pro go
to: Audio/Hardware drivers to set the buffer size.
Note - clicks and pops in the sound may also derive from
clock problems. These should be resolved first.
Clock
3 Clock Master
With the Clock Master parameter you select which of
the Konnekt units in your setup that will act as
System Clock Master.