TC electronic SDN BHD 48 - Manual (Page 53)

FABRIK C STUDIO
51
Routing modes
Two routing modes can be selected via the Routing mode
drop-down menu.
Plug-In mode - must be selected when Fabrik C is used
as VST plug-in.
Internal mode - Use internal mode when Fabrik C is used
without a host program with VST facilities and when
monitoring a source signal with no latency.
Example:
Typically you would record thru the Fabrik C channel strip
adding limited compression and EQ. In this case Internal
mode should be selected.
When mixing you would probably use the Fabrik C as a
good channel strip inserted as VST on a channel. In that
scenario “Plug-In mode” would be the correct choice.