TC electronic SDN BHD 48 - Manual (Page 41)

EFFECT button
Via the drop-down menu the EFFECT button can be set in
two modes. Reverb Time/Decay or MIDI
REVERB TIME/DECAY
When the REVERB TIME/DECAY option is selected you
can control each of these parameters by turning the big
encoder. To alternate between Reverb Time and Reverb
Decay level simply click once on the encoder.
MIDI
The big encoder can also be used to send MIDI
information. The MIDI information is either sent to the
Studio Konnekts MIDI out port and/or to the DAW.
- Select MIDI in the EFFECT buttons drop-down menu.
- Then set MIDI channel and MIDI controller type from
the drop down menus in normal mode and push
mode.
STUDIO CONTROL REMOTE PAGE
39