TC electronic SDN BHD 48 - Manual (Page 57)

55
FABRIK R STUDIO
Time page
Decay
Range: 10 ms to 20 sec
The Decay parameter determines the length of the Reverb
Diffuse Field. The length is defined as the time it takes
for the Diffuse Field to decay approximately 60dB.
PreDelay
Range: 0 to 100 ms
A short Delay placed between the direct signal and the
Reverb processing. A Pre Delay is often used to keep the
source material clear and undisturbed by the Reverb
Diffuse Field.
Modulation page
The algorithm designers have adjusted the diffuse field
part of the reverb to be as smooth and natural sounding
as possible. However, by modulating the diffuse field, the
reverb will, in certain cases, integrate better with the
entire signal. You may also find the modulation
parameters useful simply to create new flavors of reverb.
Modulation Rate
Range: +/-25
Adjusts the Rate of modulation.
Modulation Depth
Range: 0 - 200%
Adjusts the Depth of modulation.